How would a 16-17th Century European Rapier have been made?
score:5
Since times immemorial, most all types of swords were made by forging rather than casting.
Casting a sword is visually appealing, which is why you see that in the movies, but was not used in practice for multiple reasons, foremost of which were metallurgical concerns.
Casting steel requires significantly higher temperatures than forging (~1400°C vs. ~800°C) and unless you have a modern mould (along with a bunch of other modern metalurgical trappings), is likely to introduce impurities and faults into the material. This would be an expensive error, because getting an ingot of good steel would have been a non-trivial endeavour during most of history.
In contrast, forging is much gentler on the ingot, only takes two days or thereabouts (for the blade, that is) and hammering the blade can improve its properties with certain types of materials.
Also, the finished blade would usually quenched and tempered to keep it from bending.
Upvote:0
Die casting is a technique which has been in vogue since the last 250 to 300 years. Forging is a classic technique which has extensively been used since the ancient period both in Asia and Europe. Die casting requires a machine to press dies out of casting sand then a foundry to raise the metal to such a high temperature that it liquefies and at last pour the metal. It may create a sword but till now the swords are considered at the same time a weapon and an art piece with all the grains in it that the master swordsmiths incorporate in the metal after a lot of cutting folding twisting and turning. these grains will not be available if swords are made in dies. again the process of cuts and folds and strikes makes the steel uniform throughout in carbon content and adds extra plasticity to the material which will never be achieved in the cast piece even after a series of quenching and tempering. moreover forging allows us mix more than one quality of steel together retaining their basic properties. whereas cast iron is allover h*m*geneous. the Japanese katana or the samurai swords are an example of the above process of forging where hard high carbon steel is combined with low carbon soft steel to produce a one of its kind blade which is at the same time so strong as to knock a tree down and so sharp as to slice a human being from head to groin in a single blow. the strength of the blade is due to the hard steel and the razor edge is the consequence of the soft steel which had made the katana one of the deadliest weapons in the pre firearms age. so forging is a technique which allows steel to be used not only as a metal for making implements but also it allows the smith add a touch of artistic and asthetic value to the implement which the foundry can never do. moreover the forged materials go through a cycle of quenching and annealing which causes them to become flexible and strong at the same time which is a quality the rapier is supposed to have. Even in modern times we use forges for different implement making than diecasting them.
Upvote:5
First of all, swords are made from steel and casting steel is an advanced technology not available in the 17th century.
Swords and all other steel tools are forged, which means that the steel ingot is hammered into shape.
The rapier was original to Toledo and at one time that city exported swords to all parts of Europe. Later, of course, their work was widely imitated and you can find rapiers made all over. Besides Toledo, Solingen in Germany became known as a good producer.
The distinguishing characteristic of the rapier is its strength and flexibility which was tested by bending the sword around the waist. This is only possible if the steel is very good quality and has manganese and is well tempered. Original rapiers were broader than what we call a rapier today, being more similar to what we now call an epee.
The technique for making a true Toledo is a complex art which varied from swordmaker to swordmaker. The general strategy was to first hammer the ingot into a long strip which was then divided into three pieces. The pieces would then be forged together, the central one forming a core. Sword specialists call this type of construction a "welded" blade. By varying temperature of the core and the cladding it is possible to give the two parts a different temper which is essential to the suppleness of the sword. Finally the sword would be given a final tempering to harden the edge.
More post
- 📝 Did the King of Siam offer war elephants to the Union during the Civil War?
- 📝 What is this document marked "Palestine Bearer Bond"?
- 📝 The speed of sea travel in the beginning of 19th century
- 📝 When did the first electronic body modifications take place?
- 📝 How heavy were the heaviest war hammers actually used?
- 📝 How rigorously do combat engineers follow command hierarchy?
- 📝 Did Julius Caesar ban low-birth people wearing pearls?
- 📝 Who is 'Ebinichibel' mentioned in the Borgia Map?
- 📝 How did Tetricus, the last Gallic Emperor, obtain his agnomen?
- 📝 What are these historical references (from a novel)?
- 📝 Why do French houses have exterior window shutters?
- 📝 How many people died in the nazi concentration camps and death trains and marches?
- 📝 What is the dating of the earliest manuscript of the Book of Arda Wiraz?
- 📝 Can the new testament be a valid historical record on the real life of Jesus?
- 📝 World War 1 Indian propaganda posters
- 📝 Is my comparison on the significance of black and red pottery plausible?
- 📝 Why are Vorarlberg and Tirol part of Austria, when they are only connected to it by high mountains?
- 📝 How was the Czech sudetenland repopulated by Czechs?
- 📝 What rank did cadet branches hold in the peerage?
- 📝 How did a besieged city/castle defend itself vs. catapulting diseased dead bodies into it?
- 📝 Were debts owed or outstanding debts factored into the Roman census?
- 📝 What mysterious Flemish peasant activity is depicted in this painting?
- 📝 Irish Nationalist Party in Liverpool
- 📝 Can anyone help identify the name of the white vessel in this photo w/the masts and funnel?
- 📝 How many aircraft participated in each of the three waves against the Yamato?
- 📝 What exactly were the dealings of Ea-Nasir ("The Worst Businessman Of The 18th Century BC")?
- 📝 Did Archimedes spend time in Alexandria, Egypt?
- 📝 Why was it tradition to offer 'half-baked cake' to departing students?
- 📝 What were the racial views of the Nazis towards the Greeks?
- 📝 Were there women who were against giving women the right to vote?
Source: stackoverflow.com
Search Posts
Related post
- 📝 How would a 16-17th Century European Rapier have been made?
- 📝 Which European towns or cities are architecturally most similar today to how they would have been in 16C-17C?
- 📝 How would Chess have been played in England in 1450-1600?
- 📝 What would have been the carrying capacity for 11th-13th century backpacks?
- 📝 How would Eastern European emigres have traveled across Eastern Europe to Warsaw in the early 20thC?
- 📝 What psychology would have been taught at the 19th century Lyceum?
- 📝 How likely would it have been for a rural Bohemian to encounter someone with darker skin?
- 📝 Would the gun crews have different responsibilities aboard a 17th century ship than on the USS Constitution?
- 📝 What's the Ancient Egyptian phrase/word for “Royal Road of Life”? And how would it have been spelt?
- 📝 How would a Spartan have held his shield?
- 📝 Where would the first nuke have been dropped in Germany?
- 📝 Why could China keep most of the lands it conquered after 17th century but European powers could not?
- 📝 Why would graphite have been confused with lead?
- 📝 What would have been the typical drinks for a US farmer in the late 18th/early 19th century?
- 📝 How would slaves have addressed their masters in Ancient Greece?
- 📝 How likely it is that a nobleman of the eighteenth century would give written instructions to his maids?
- 📝 How many lives were estimated to have been saved by the Hiroshima and Nagasaki bombs?
- 📝 What would have been the price of a loaf of bread in 1645 Amsterdam?
- 📝 What courses would have been required to get a B.A. in America in the 1930s?
- 📝 What would a Norseman in the early 11th century have worn as daily clothing?
- 📝 Would colonial Maryland have been tolerant to all religions?
- 📝 How have European microstates survived?
- 📝 What did the top minds of the late 17th century have to say about Salem witch trials?
- 📝 What other one word responses have been made to military ultimatums besides "Nuts!", "Mokusatsu" and "If"?
- 📝 What would people have been smoking in 700 AD Central / Eastern Asia?
- 📝 Would a common person in the 18th century have heard Mozart's music during his lifetime?
- 📝 How common was banditry in 16th & 17th century Great Britain and Ireland?
- 📝 Would the original readers of Lewis Carroll's books have made connections between the experiences in the books and drug use?
- 📝 Why would this word have been an unsuitable name in Communist Poland? Is it because it's a racial slur?
- 📝 How would prospective members join a medieval European guild?